Quick Answer

The five most common sheet metal bending techniques are: air bending (90% of all bending, uses V-dies with the punch stopping short of the die bottom), bottom bending or coining (pressing the material fully into the die for precise angles), rotary bending (rotating tooling for complex profiles), roll bending (three rollers for curved panels), and hemming (folding edges for safety or strength). Each technique suits different applications and accuracy requirements.

Air Bending

Air bending is the most common technique, accounting for approximately 90% of all press brake work. The punch presses the sheet into a V-die but does not bottom out -- the bend angle is determined by punch penetration depth. Advantages: same tooling can produce multiple angles, requires 30-60% less tonnage than bottoming, and is suitable for all thicknesses. Accuracy: ±0.5-1 degree. Recommended die opening: 6-8x material thickness.

Bottom Bending and Coining

Bottoming presses the material fully into the V-die, while coining applies enough tonnage to permanently deform the material at the bend line. These techniques produce the most accurate bends (±0.3 degrees) but require specific tooling for each bend angle and 5-10x more tonnage than air bending. Used for precision parts requiring consistent bend angles.

Rotary Bending and Roll Forming

Rotary bending uses a rotating tool that forms the material progressively, ideal for long parts with complex cross-sections. Roll bending uses three rollers arranged in a pyramid to produce curved panels, cylinders, and cones. These techniques are less common in general fabrication but essential for architectural metalwork, HVAC ducting, and structural sections.

Hemming and Seaming

Hemming folds the sheet edge back onto itself to create a smooth, safe edge and increase stiffness. Common hems: flat hem (180-degree fold), open hem (about 135 degrees), and tear-drop hem (for edge clearance). Seaming joins two sheet edges by interlocking folds -- used for ductwork, enclosures, and containers.

Why Choose SOMI Custom Parts

At SOMI Custom Parts, our press brake department is equipped with modern CNC machines featuring 7-axis backgauges and angle measurement systems. Our operators select the optimal bending technique for each part based on material thickness, bend radius requirements, and production quantity. We provide DFM feedback to optimize bend sequences and minimize tooling changes.

Case Study

An electronics enclosure required 12 bends including three 90-degree flanges, two 45-degree chamfered edges, and a 180-degree hemmed edge for safety. SOMI programmed a 12-step bending sequence on our CNC press brake, completing each enclosure in 3 minutes. The bend-to-bend consistency was within ±0.5 degrees across the entire 3,000-piece production run.

Industry Data

Air bending accounts for 90% of all press brake operations (Fabricators and Manufacturers Association, 2025). Modern CNC press brakes with angle measurement feedback can achieve first-piece correct setup in 70% of cases, compared to 30% for manual machines. This reduces setup time by an average of 60% and material waste by 40%.

Related Questions

• How to calculate bend allowance for sheet metal?
• What thickness and metals can be laser cut?
• What types of welding are used in sheet metal?
• What processes are involved in sheet metal fabrication?