Quick Answer

Industrial fiber laser cutting achieves ±0.1mm (0.004") accuracy on materials under 3mm thick, ±0.2mm on 3-10mm materials, and ±0.3-0.5mm on thick materials over 10mm. Repeatability is ±0.05mm across parts in the same production run. Cut edge quality ranges from 6-25 Ra depending on material and parameters.

Accuracy by Material and Thickness

Thin sheet (0.5-3mm) mild steel/stainless: ±0.1mm positioning, ±0.05mm repeatability. Kerf: 0.1-0.2mm. Medium (3-10mm) steel/aluminum: ±0.15-0.2mm, kerf: 0.15-0.3mm. Thick (10-25mm) steel: ±0.3-0.5mm, kerf: 0.2-0.4mm. These tolerances apply to flat parts. Additional variation occurs during bending (±0.5 degrees) and assembly (±0.5-1mm for welded assemblies).

Factors Affecting Laser Accuracy

Beam quality: Higher-mode lasers produce wider kerfs and rougher edges. Focus position: Proper focus is critical for maximum accuracy. Assist gas: Nitrogen produces cleaner edges than oxygen for stainless. Material condition: Rust, oil, or coatings can affect cutting consistency. Thermal effects: Heat buildup in small parts can cause distortion. Machine calibration: Regular calibration is essential for maintaining accuracy.

Edge Quality

Laser-cut edges have three zones: a top edge with slight rounding (0.05-0.1mm), a smooth middle section, and a bottom edge with minor dross (0.1-0.3mm for most materials). Surface finish on the cut edge: 6-12 Ra for thin materials with nitrogen assist, 12-25 Ra for thick materials with oxygen assist. For most fabrication applications, laser-cut edges are acceptable without additional finishing.

Why Choose SOMI Custom Parts

At SOMI Custom Parts, we maintain our fiber laser cutting equipment with regular calibration to ensure consistent accuracy. Our operators are trained to select optimal cutting parameters for each material and thickness. We perform first-article inspection on every new part design and provide dimensional inspection reports upon request. For parts requiring tighter tolerances than laser cutting can achieve, we offer CNC machining as a post-processing option.

Case Study

A medical device company needed stainless steel components with cutouts and slots held to ±0.1mm for precise assembly alignment. SOMI laser-cut the parts from 1.5mm 304 stainless using nitrogen assist gas. First-article CMM inspection showed all features within ±0.08mm. The client was able to assemble the components without any fitting adjustments, and the production run of 5,000 parts maintained the same accuracy throughout.

Industry Data

Fiber laser cutting accuracy has improved 40% over the past 5 years due to advances in beam quality, motion control, and adaptive focusing technology. Modern fiber lasers with 100-micron delivery fibers produce the most consistent cut quality, with edge roughness of 3-8 Ra achievable on thin stainless steel (Laser Institute of America, 2025).

Related Questions

• What thickness and metals can be laser cut?
• What are the common metal bending techniques?
• How to calculate bend allowance?
• What processes are involved in sheet metal fabrication?